Frontgate 142157, Руководство по сборке

Страница: 18 / 27

STORAGE
GENTLY PRESS BRANCHES AGAINST THE TREE TRUNK AS YOU DISMANTLE THE TREE
REMOVE THE TREE STAND FROM SECTION A
CAREFULLY PLACE THE TREE SECTIONS AND TREE STAND BACK INTO THE CARTON(S) AND
TAPE THEM CLOSED
CAUTIONS AND WARNINGS
o
DO NOT LIFT SECTIONS OF THE TREE WITH THE BRANCHES. LIFT USING THE METAL POLE.
o
DO NOT STEP ON THE BRANCHES DURING THE ASSEMBLY PROCESS
o
DO NOT TWIST THE BULBS WHEN REPLACING AND ONLY USE THE SPARE BULBS
PROVIDED IN THE CARTON AS REPLACEMENTS. PULL THE LAMP AND PLASTIC BASE
STRAIGHT OUT OF THE LAMPHOLDER.
o
DO GRASP ELECTRICAL PLUGS AND REMOVE IT FROM THE RECEPTACLE OR OUTLET
DEVICE. NEVER UNPLUG BY PULLING ON THE CORD.
o
PLEASE DO NOT REMOVE TAPE FROM PLUG HUBS; THIS IS FOR YOUR PROTECTION AND
TO INSURE THAT THE PLUGS MAINTAIN A FIRM CONNECTION.
o
DO NOT HANG ORNAMENTS OR OTHER OBJECTS FROM THE ELECTRICAL CORDS OR
WIRES.
o
THIS PRODUCT EMPLOYS ELECTRICAL OVERLOAD PROTECTION (FUSES) INSIDE EACH
PLUG. SPARE FUSES ARE PROVIDED IN THE CARTON. OUR PRODUCT DESIGN HAS NOT
EXPERIENCED FUSE PROBLEMS; HOWEVER, IF A FUSE BLOWS THE PRODUCT SHOULD BE
UNPLUGGED BEFORE REPLACING ANY FUSE.
o
WHEN A LIGHT SET FLICKERS OR GOES ON AND OFF, THE MOST COMMON PROBLEM IS A
LOOSE FITTING BULB. CHECK TO MAKE SURE ALL BULBS ARE SEATED FIRMLY IN THE
SOCKETS.
o
THE MOST COMMON PROBLEM WITH A LIGHT SET IS A BULB THAT NEEDS REPLACING.
LOOSE OR DAMAGED BULBS CAN CAUSE AN ENTIRE STRING TO FAIL. A BURNED OUT
BULB WILL NOT CAUSE THE STRING TO GO OUT IF IT IS NOT REMOVED.
CARE AND MAINTENANCE
STORE CARTON IN COOL AND DRY PLACE.
DO NOT STORE THE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE
EXCEEDS 100˚ F.
PLEASE CONTACT ONE OF OUR PRODUCT SPECIALISTS FOR ASSEMBLY ASSISTANCE OR
QUESTIONS AT 1-800-537-8484 OR EMAIL
PS@FRONTGATE.COM . SPECIALISTS ARE AVAILABLE
WEEK DAYS 8:00 AM TO 8:00 PM OR SATURDAY 9:30 AM TO 6:00 PM.