Frontage 141337 MUL, Руководство по сборке

Страница: 7 / 15

SKU 141339 CLE - VIRGINIA PINE 9ft - CLEAR
2205 TIPS METAL STAND
L U 1700 LIGHTS
MAX DIAMETER 71”
IONS
VIRGINIA PINE 9ft - CLEAR - ITEM #141339 CLE
Step 1
Pull apart the legs of the stand so that they are “X” shaped.
Fasten the bottom screws to lock the stand into position.
Step 2
Insert the section (A) of the tree into the stand and tighten
screws on base to secure tree pole.
Step 3
Plug surge protector into the remote control receiver. Then,
plug remote control receiver into wall outlet.
Step 4
To shape your tree start with the bottom most layer of
branches, with each branch start with the tips closest to the
pole and lift each tip up and out in alternating directions.
Repeat for each branch. It is recommended to shape section
(A) before adding section (B).
Step 5
Insert the section (B) of the tree into the section (A) of the
tree. Plug light set of section (A) into the surge protector. Then,
plug light set of section (B) into section (A).
Insert the section (C) of the tree into the section (B) of the
tree. Plug light set of section (B) into section (C).
Step 6
Repeat step 4 for shaping.
Step 7
Step 8
Repeat step 4 for shaping.
Step 9
Insert section (D) of the tree into the section (C) of the tree.
Plug lights from (D) into section (C).
To shape the top (D) section of the tree it will be necessary to
gently bend the branches downward to the desired angle before
shaping tips.
Step 10
PARTS LIST
A. BOTTOM
B. LOWER MIDDLE
C. UPPER MIDDLE
D. TOP
HARDWARE
A. TREE STAND QUANTITY 1 PC
1/4” SCREWS FOR TREE STAND QUANTITY 7 PCS
NUMBER OF PERSONS
RECOMMENDED FOR
ASSEMBLY: 2
ASSEMBLY INSTRUCTIONS
COLORCODE ON PLUG
RED
BLUE
GREEN
BLACK
ACCESSORY BAG
-
-
SURGE PROTECTOR
- REMOTE CONTROL W/ RECEIVER
- EXTRA BULBS AND FUSES
- LIGHT STRING
QUANTITY 2 PCS
20
9c.