Frontage 141337 MUL, Руководство по сборке

Страница: 12 / 15

ASSEMBLY INSTRUCTIONS
PARTS LIST
A. BOTTOM
B. LOWER MIDDLE
C. UPPER MIDDLE
D. TOP
SKU 141340 A/B CLE - VIRGINIA PINE 10ft - CLEAR
2765 TIPS METAL STAND
UL 1900 LIGHTS
MAX DIAMETER 75”
NUMBER OF PERSONS
RECOMMENDED FOR
ASSEMBLY: 2
COLORCODE ON PLUG
RED
BLUE
GREEN
BLACK
VIRGINIA PINE 10ft - CLEAR - ITEM #141340 A/B CLE
Step 1
Pull apart the legs of the stand so that they are “X” shaped.
Fasten the bottom screws to lock the stand into position.
Step 2
Insert the section (A) of the tree into the stand and tighten
screws on base to secure tree pole.
Step 3
Plug power strip into the remote control receiver. Then,
plug remote control receiver into wall outlet.
Step 4
To shape your tree start with the bottom most layer of
branches, with each branch start with the tips closest to the
pole and lift each tip up and out in alternating directions.
Repeat for each branch. It is recommended to shape section
(A) before adding section (B).
Step 5
Insert the section (B) of the tree into the section (A) of the
tree. Plug light set of section (A) into the power strip. Then,
plug light set of section (B) into section (A).
Step 6
Repeat step 4 for shaping.
Step 7
Insert the section (C) of the tree into section (B) of the tree.
Plug lights set from section (C) into section (B).
Step 8
Repeat step 4 for shaping.
Step 9
Insert section (D) of the tree into the section (C) of the tree.
Plug lights from (D) into section (C).
Step 10
To shape the top (D) section of the tree it will be necessary to
gently bend the branches downward to the desired angle before
shaping tips.
HARDWARE
A. TREE STAND QUANTITY 1 PC
1/4” SCREWS FOR TREE STAND QUANTITY 7 PCS
ACCESSORY BAG
-
- POWER STRIP
- REMOTE CONTROL W/ RECEIVER
- EXTRA BULBS AND FUSES
- LIGHT STRING
QUANTITY 2 PCS
20
5b.