WTAN030_REV_A01
3
9
9
10
10
© 2020 FRONT RUNNER VEHICLE OUTFITTERS
5
FIT AND SECURE
2
Slide the two M8 x 20 Hex Bolts (Item 9) into
the T-Slot on the third Slat from the back of
your Rack as shown.
Slide the two Hex Bolts to the center of the
T-Slot Beading and space them 20mm
apart.
4MM
2.1
2.2
2.3
Loosen and remove the corner of the Rack
as shown.
Slide the M8 x 30 Hex Bolt (Item 5) into the
Channel as indicated by the arrow. Line the
Hex Bolt up with the center of the T-Slot
Beading from Step 2.1.
Refit the corner.
Choose to mount your 42L Water Tank
on either the front or back of the Slimline II.
The Tank must be positioned using either
the front or rear slat.
Insert the two T-Slot Beading (Item 10) into
the two rear or front slats as shown
where you would like the Tank mounted.
5
