background image

WTAN030_REV_A01

2

© 2020 FRONT RUNNER VEHICLE OUTFITTERS

TOOLS NEEDED

13MM

13MM

IN THE BOX 

FIGURE 1.1

4mm

1         1 X       Fuel Tank Yellow
2         1 X       Strap
3         1 X       M8 Eye Nut 

 

4         1 X       M8 x 30 Hex Bolt
5         2 X       M8 Nut Cap
6         2 X       M8 Nyloc Nut
7         3 X       M8 X 16 x 1.6SS Flat Washer
8         2 X       M8 x 20 Hex Bolt
9         2 X       T - Slot Rubber 300mm Long                                          

1

8

9

10

5

2

3

7

6

8

GET ORGANIZED

1

Содержание WTAN030

Страница 1: ... AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR VEHICLE CHECKING THE ATTACHMENTS PRIOR TO USE AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT WEAR AND DAMAGE THEREFORE YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS OR IF YOU HAVE NO MECHAN...

Страница 2: ...3MM 13MM IN THE BOX FIGURE 1 1 4mm 1 1 X Fuel Tank Yellow 2 1 X Strap 3 1 X M8 Eye Nut 4 1 X M8 x 30 Hex Bolt 5 2 X M8 Nut Cap 6 2 X M8 Nyloc Nut 7 3 X M8 X 16 x 1 6SS Flat Washer 8 2 X M8 x 20 Hex Bolt 9 2 X T Slot Rubber 300mm Long 1 8 9 10 5 2 3 7 6 8 GET ORGANIZED 1 ...

Страница 3: ... 2 2 3 Loosen and remove the corner of the Rack as shown Slide the M8 x 30 Hex Bolt Item 5 into the Channel as indicated by the arrow Line the Hex Bolt up with the center of the T Slot Beading from Step 2 1 Refit the corner Choose to mount your 42L Water Tank on either the front or back of the Slimline II The Tank must be positioned using either the front or rear slat Insert the two T Slot Beading ...

Страница 4: ...en off the Rack by removing the Plastic Cap loosening the M8 Eye nut and lifting the Tank Strap up and over as shown You will need to squeeze the Y Spring on the end of the Plastic Cap s retaining wire to release the Plastic Cap from the Tank Place the Tank with Tank Strap Item 2 onto the Rack as shown lining up the holes in the Tank Strap with the Hex Bolts inserted in Step 2 2 and 2 3 Ensure tha...

Отзывы: