© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
7
TENT031_REV_A01_MV
5.4
To fit the four shorter bows to the front
and rear of the fly sheet, slide them into
the holes near the ends of the aluminum
extrusion on the base of the tent. Use the
same technique as in Step 5.6 to secure
them.
Note: The window bows will maintain
some curve after the first use - no
worries! This is normal.
The steel bows can be stored in their
bag, under the mattress when not in use.
SETTING UP YOUR TENT
5
5.2
Fit the two longer fly sheet bows on
each side of the tent, sliding them
securely into the round section of the
aluminum channel between the base
boards.
5.3
Insert the top hook by using two hands
and pushing up and inward to create a
curve, making it easier to hook into the
eyelets.
5.1
Fit the three U-shaped support tubes as
shown.
These do not need to be removed again
once fitted.
