Fronius VR 1500-M, Руководство по эксплуатации

Страница: 28 / 40

28
Attaching the
welding torch to
the drive plate
Attach the strain relief, insert the corrugated hose
Attach the strain relief (1) for the inter -
connecting cable assembly controller
to the controller bracket (2) using Ex -
trude- Tite M5 x 16 screws.
Use a screwdriver to open up the hose
holder (3) on the controller bracket
Insert the corrugated hose (4), close
the hose holder (3).
Inching in the corrugated hose drive plate side
Use a screwdriver to open up the hose
holder (4) on the drive plate
Insert corrugated hose (5), close hose
holder
Attach cable assembly components:
-
power cable to connector welding po -
tential (3)
-
control cable (gray) to the controller
connector (1)
-
shielding gas hose to the shielding
gas connector (2)
Attaching the controller
Attach „LocalNet“ cable (6) to LocalNet
(7) connector
Attach control cable (8) to drive plate
connector (9)
Use cable ties to fasten cable
1
2
3
(3) (4) (5) (2) (1)
4
5
6
(7)
(9)
(8)
(6)
7
8
9