Fronius TransCut 300, Инструкция по эксплуатации/Перечень запасных частей

Страница: 15 / 34

11
EN
General remarks
The TransCut 300 plasma cutting system
is a mobile plasma cutting device with a
fixed plasma cutting torch.
This plasma cutting torch is based on a
system with regenerative cooling which
uses a liquid cutting medium rather than
gas or compressed air.
The cutting medium (TransCut Liquid) is
transferred from the integrated tank to the
cutting torch, where it is converted into
gaseous form. The cutting medium is
poured into practical cartridges that are
easy to refill.
Basic system
principle
Fig. 1 TransCut 300 plasma cutting system
The plasma cutting system is small and compact, but at the same time so robust that it
can function reliably even under hard operating conditions. A powder-coated sheet-metal
housing with protected controls allows the unit to meet the most stringent demands. The
carrying strap facilitates easy transportation, both in-house or on-site. Device concept
Application areas
The TransCut 300 plasma cutting system is particularly well suited for mobile deploy-
ment on construction sites and in installation projects due to its integrated supply of
liquid cutting medium and its compact size. But even when used as stationary units in
workshops or industrial facilities, the machines are powerful and economical alternati-
ves.
- Air conditioning and ventilation systems
- Automotive sheet-metal work / bodywork
- Industrial plant and pipeline construction
- Metal and gantry construction / fitting shops and forges
- Maintenance / repair
- Boiler and container construction
- Assembly companies
The plasma cutting tool operates on the principle of a resonance inverter, offering a
number of advantages:
-
Outstanding cutting properties
- Lightness in weight and compactness
- Excellent portability