manualshive.com logo in svg

Fronius Selectiva 4.0 Series, Руководство по эксплуатации

Поделиться
Скачать
Fronius Selectiva 4.0 Series Скачать руководство пользователя страница 63

including diffuser is installed in the gap between the front wall of the housing
and the upper part of the housing.

Air filter

In dusty environments, the air filter prevents contamination of the inside of the
device. This prevents any reduction in performance or other impairment of the
device. Detailed information can be found in the corresponding User Information.
Cleaning interval as required (manufacturer's recommendation: monthly)

Remote control
system

The remote control system allows full operation of the device from a distance of
up to 30 m (98 ft., 5.1 in.). This option contains a full control panel in an alumin-
um housing with degree of protection IP42.

Gateway Link

The Gateway Link enables the easy connection of the gateway to the battery
charger. The gateway can be connected without opening the battery charger.

Gateway

The gateway is the link between the battery charger and Charge&Connect. De-
tailed information can be found in the corresponding User Information.

63

EN-US

Содержание Selectiva 4.0 Series





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды