Fronius Robacta Reamer V 70 Han12P, Руководство по эксплуатации, Страница: 4 / 76

Fitting the cleaning cutter 35
Fitting the cleaning cutter 35
Adjusting the position of the cleaning motor 36
Adjusting the position of the cleaning motor 36
Configuring the spray device 37
Configuring the spray device 37
Installing the electrically controlled wire cutter (optional) 38
How the electrically-controlled wire cutter works 38
Maximum wire diameter 38
Installing the electrically controlled wire cutter 38
To establish the compressed air supply: 40
Establishing the compressed air supply for the cleaning device, function of the compressed air
relief valve 40
Starting up the parting agent nebuliser 41
Filling the parting agent container (1 litre) and connecting it to the cleaning device 41
Connecting the parting agent container (10 litres) to the cleaning device 42
Adjusting the parting agent nebuliser spray amount 43
Manually checking the cleaning device functions 44
Safety 44
Manually checking the cleaning device functions 44
Starting up the cleaning device 46
Prerequisites for start-up 46
Start-up 46
Cleaning programme 47
Safety 47
Cleaning program sequence 48
Signal waveform for cleaning 52
Signal inputs 52
Signal outputs 52
Signal waveform optional wire cutter (input) 52
Care, maintenance and disposal 53
Safety 55
Safety 55
Ensuring that the cleaning device is depressurised 56
Care, maintenance and disposal 57
General 57
Before each start-up 57
Daily 57
Weekly 57
Every 6 months 57
As necessary 57
Disposal 58
Troubleshooting 59
Safety 61
Safety 61
Ensuring that the cleaning device is depressurised 62
Troubleshooting 63
Errors in program sequence 63
Technical data 65
Technical data 67
Robacta Reamer V 70 Han12P 67
Appendix 69
Robacta Reamer V 70 Han12P Circuit Diagram 70
Robacta Reamer V 70 Han12P pneumatic diagram 71
Declaration of conformity 72
4