11
EN
Maintenance and care
General remarks
Under normal operating conditions the MC fume extractor only requires a minimum of
care and maintenance. However it is imperative that a few points are followed in order
to keep the system operational over many years.
Warning!
An electric shock can be fatal. Before opening, switch the device off,
remove the mains plug and fit a clearly legible and easily understood warning
sign against switching the machine back on - discharge the electrolytic capaci-
tators if necessary. The screws for the case represent a suitable conductor
connection for earthing the case. The screws must NOT be replaced by any
other screws without a reliable PE conductor connection.
At every initial
operation
Check the following parts for possible damage:
-
Socket, mains plug and mains cable
-
Mains plug and mains cable for the MagicCleaner CrNi Cleaning Device
-
Cleaning handle and cleaning handle hosepack for the MagicCleaner CrNi Clea-
ning Device
Check the ventilation flaps or air slots for turbine exhaust air and that air circulation is
unimpeded. The ventilation flaps or the air slots for the turbine exhaust air must not be
covered in any way, not even partially.
If the activated
carbon filter is
full
-
Dismantle the extractor‘s side panels and blow the inside of the device clean
using dry, pressure-reduced compressed air
Note!
Electronic components may be damaged by compressed air. Do not
aim airjets at electronic components from too close a range.
-
Clean ventilation flaps or air slots for turbine exhaust air
Every 6 months
-
Replace activated carbon filter
-
Replace filter mats
Note!
Always replace used activated carbon filters and associated filter mats
with new filters and filter mats,
-
never re-use used filters and filter mats,
-
dispose of used filters and filter mats in accordance with official regulati-
ons.
Caution!
Risk of injury due to acid or acidic materials. When cleaning the MC
fume extractor using compressed air, use suitable safety gloves and suitable
eye protection.
Do not point the MC fume extractor in the direction of other people when
cleaning it with compressed air.
