background image

31

FDV-MF charger

These devices are largely maintenance-free. To ensure problem-free operation, observe 

the following instructions:

-  Keep the ventilation openings (I) clean 

to ensure that cooling air is able to 

circulate. 

-  Risk of short-circuit: - make sure that 

no metal objects such as metal chips 

get into the charger or into the battery 

holder, or penetrate the interior of the 

device through the ventilation open-

ings.

-  The charger and the battery pack are designed for each other. Therefore you should 

only ever use the supplied charger FDV MF to charge the battery pack.

-  Storing the battery pack in the live charger keeps the battery pack in the charged 

state by means of a permanent conservation charge.

-  Do not leave flat battery packs in the charger for longer than 1 month if the charger is 

unplugged from the mains, in view of the risk of exhaustive discharge.

-  A new battery pack or one that has not been used for a long time only reaches its full 

capacity after about 5 charging and discharge cycles.

-  If possible, drain the battery pack completely before recharging. Starting the charging 

process repeatedly with a charged battery reduces its service life.

-  Avoid prolonged warming of the battery pack by sunlight or radiators -  

temperatures above 45°C reduce service life and increase self-discharge.

Charger FDV MF with battery pack

J

I

J

Special notes on NiMH battery packs:

The performance of NiMH battery packs is considerably reduced in ambient tempe

-

ratures outside a range of 0° C to 45° C. 

Do not overload the driving vehicle (do not place the vehicle under so much strain 

that it comes to a complete stop). 

To maintain their full capacity, NiMH battery packs must be recharged every four 

months, even if they have not been used. 

After every 10th charging process, NiMH battery packs should remain in the char

-

ger for an extra hour after the quick-charge process has been completed in order to 

equalise any capacity discrepancies across the cells. 

Owing to their self-discharging properties, store NiMH battery packs at ambient tem

-

peratures of between 0° C and 25° C.

Battery pack

WARNING! 

Danger of environmental damage

Incorrect disassembly and disposal of the separate driving vehicle components 

can result in serious environmental damage.

The product must only be disposed of by trained and qualified personnel.

Ensure that:

all machine components and electrical parts are separated according to type and 

disposed of properly

drained or defective battery packs are disposed of by the dealer, Fronius Customer 

Service or at officially-authorised disposal sites. The battery packs are then recycled.

Disposal of com-

ponents

NOTE! 

If you have any further questions about disposal / recycling please ad-

dress them to the manufacturer.

Содержание FDV 15 MF













































Отзывы: