Fronius Acctiva Professional 30A UCN, Руководство по эксплуатации

Страница: 28 / 119

16
4. Connect (+) charging terminal to positive pole on battery
5. Connect (-) charging terminal to negative pole on the battery, or to vehicle body (e.g.
engine block) in the case of vehicle electrical systems
1. Once the charging terminals are connected, press start/stop button for approx. 5 secs
WARNING! Risk of serious damage if the charging terminals are connected
incorrectly. The reverse polarity protection facility is inoperative if the current
input test is started manually (battery voltage < 1.5 V). Connect charging
terminals to correct poles and ensure proper electrical connection to vehicle
terminals.
2. Ensure charging terminals are connected to correct poles
3. Set the capacity of the battery to be tested
Start the charge
acceptance test
Charger detects that the battery is connected, carries out a self-test and starts the
charge acceptance test.
2. Select charge acceptance test mode
1.
Charge acceptance test
Self test Charge acceptance test
Starting the
charge accep-
tance test manu-
ally
3. Start test
If there is no confirmation of correct pole connection within 2.5 secs, the device reverts
to menu mode.