Fronius Acctiva Professional 30A UCN, Руководство по эксплуатации

Страница: 25 / 119

13
EN
Flash operation
Starting the
„flash operation“
3. Connect (+) charging terminal to positive pole on battery
4. Connect (-) charging terminal to negative pole on the battery, or to vehicle body (e.g.
engine block) in the case of vehicle electrical systems
Charger detects that the battery is connected, carries out a self test and starts the „flash
operation“.
1.
Important! Start the „flash operation“ manually if:
- there is no battery connected to the vehicle
- the battery voltage on the connected battery is < 1.0 V
1. Once the charging terminals are connected, press start/stop button for approx. 5
secs
WARNING! Risk of serious damage as a result of incorrectly connected char-
ging terminals. The reverse polarity protection facility is inoperative if the „flash
operation“ is started manually. Connect charging terminals to correct poles and
ensure proper electrical connection to vehicle terminals.
Starting the
„flash operation“
manually
- the maximum voltage command value set in the
USER menu is shown in the top half of the display
- the current parameters are shown in the bottom
half of the display.
2. For external power supply, select „flash operation“ mode
Self test
E.g.: „Flash operation“
5. Press the Info button to display the parameters in the following sequence:
- actual charging current
- actual battery voltage
- amount of charge (Ah) fed in so far
- energy (Wh) fed in so far
- length of time charging so far