7
6.3
Tensioning the strapping
The tension valve lever is pressed down.
The lever is caught completely and the strap is
tensioned until the air motor stalls.
If the cycle has to be interrupted the catch bolt has
to be pressed to the left.
6.4
Sealing the strapping
The sealing valve lever is pressed down until the
seal is cut and the upper strap sheared;
the tensioning process is interrupted
automatically.
6.5
Releasing the tool
The tool can be released from the strapping
without any further action after completing the
strapping cycle.
By lifting the air motor the strap end is removed
from the tool.
6.6
Tension regulation
The tension is regulated by the continuous
adjustment of the throttle screw.
The air supply is reduced by turning the screw
clockwise.
The throttle screw is located at the rear end of the
air motor.
