14
A482enT2.man
10 EXCHANGE OF WEARING PARTS
All screws screwed in steel are secured with Loctite 222.
10.1 Exchange of tensioning wheel and slide plate.
• Unscrew end cover A48.2213.
• Remove tensioning wheel A48.2211 from the tension shaft.
• Unscrew slide plate A48.1213.
• Reassemble in opposite order (observe the position of the tensioning wheel).
10.2 Exchange of cutter, cutter jack, cutting jaws and notching knives.
• Unscrew cylinder cover A48.2118.
• Remove diaphragm A48.2131.
• Unscrew piston plate A48.2117 by pushing the piston plate against the pressure springs.
• Unscrew cover plate A48.2135.
• Unscrew both cutting jaw guides A48.1133.
• Remove cutting jaw assembly downwards in a diagonal position.
• Exchange cutter A48.2119.
•
If in addition the cutter jack A48.2120 has to be replaced,
the cylinder bottom must be removed from the connection plate A48.2121 and the connection plate must
be unscrewed from the tensioning body A48.2201.
•
In order to be able to replace the cutting jaws and the notching knives a side plate must be removed from
the cutting jaw assembly.
Reassemble in opposite order.
Do not forget to secure the screws (LOCTITE 222)!
Tighten the screws N1.1128 in the cover plate using a force of 41 Nm!
11 CHART OF TYPES
UNI = Uniflex (Regular Duty max. 850 N/mm
2
/ 123`000 psi)
ULT = Ultraflex (High Tensile max. 1100 N/mm
2
/ 160`000 psi)
Item-No.
Model
Strap width
Strap thickness
Strap -
quality
Max. tension
Speed
N
lbs.
mm/s
inch/s
13.4610
A482/19/0.63-0.80/ULT/4.0
19 mm / 3/4" 0.63-0.80 mm / .025"-.031"
ULT
4000
900
125
4.9
13.4620
A482/19/0.80/ULT/7.0
19 mm / 3/4"
0.80 mm / .031"
ULT
7000
1570
70
2.7
13.4630
A482/19/0.70-0.90/UNI/4.0
19 mm / 3/4" 0.70-0.90 mm / .027"-.035"
UNI
4000
900
125
4.9
13.4640
A482/19/0.70-0.90/UNI/7.0
19 mm / 3/4" 0.70-0.90 mm / .027"-.035"
UNI
7000
1570
70
2.7
