Fromm A337.0001 Скачать руководство пользователя страница 15

Страница: 15 / 16

A3370001enT2.man

Exchange of the punch, the dies and the cutter

•

Disassemble the ejector and the ejector screw.

•

Unscrew the strap stop and pull the upper ejector together with the strap stop out of the tool.

•

Unscrew the side plate and disassemble both guide gibs.

•

Slightly lift the sealing lever and remove bearing pick-up attachment, link and the die- and cutter piston from
the sealing body.

•

Clean all parts and replace the worn ones.

•

Fitting in opposite order.

Important!

Bearing areas and guides have to be greased.

The fastening screws for the punch and the dies have to be secured with LOCTITE 222.

Strap stop with upper ejector

Bearing pick-up attachment

Guide gibs

Die and cutter piston with link

Dies left and right

Cutter

Ejector

Ejector screw

Punch

Содержание A337.0001

















Результаты поиска

Содержание A337.0001

Отзывы:

Похожие инструкции для A337.0001

Бренды по названию

Популярные бренды

Fromm A337.0001, Руководство по эксплуатации

Результаты поиска

Содержание A337.0001

Отзывы:

Похожие инструкции для A337.0001

Бренды по названию

Популярные бренды