NOTICE
If condensation escapes during the initial heat-up phase, this does not indicate a
fault.
❒ Tip: If this occurs, clean up using a cleaning rag.
3.2 Filling/refilling the store with fuel
When filling the store you should always ensure that you are using the right fuel:
⇨ See "Permitted fuels" [page 12]
3.2.1 Loading of fuel for a partially emptied store with rotary agitator
If there is still sufficient fuel in the store (the head of the rotary agitator is completely
covered with fuel and the rotary agitator arms are not extended), the store can be
filled:
❒ Load the fuel at the filling opening
3.2.2 Loading wood chips in an empty store (not under pressure)
NOTICE! If the head of the rotary agitator is already free of material and the arms /
spring blades are extended, then the feeder unit must be active during the filling
process.
❒ Activate “Extra heating” mode in the quick menu
Operating the System
3
Filling/refilling the store with fuel
Operating Instructions TX 200-250 | B1060217_en
23
