Fröling T4e Скачать руководство пользователя страница 30

Страница: 30 / 76

Access all system information. No parameters may be changed in the info menu.

System menu for opening the system settings. All parameters can be displayed and/or

edited depending on the user level.

⇨ See "Navigation within the system menu" [page 32]

Display and change the current boiler mode

⇨ See "Change boiler mode" [page 38]

Display icons for using froeling-connect

⇨ See "Display icons for froeling-connect/remote control" [page 31]

Brightness sensor for automatically adjusting the brightness of the display

LED frame to display the current system status

⇨ See "Status display" [page 30]

USB interface for software update (➾ see operating instructions for the boiler

controller)

NOTICE! USB interface is for service purposes only and must not be used to load

devices or for PC connections!

Status display

The status display indicates the system’s operating status:

▪ Constant in the set colour: SWITCHED ON

Boiler in an error-free operating state (standby, heating, …)
Set colour can be changed using the setting wizard “Switching on for the first time”

▪ ORANGE flashing: WARNING
▪ RED flashing: FAULT

Control icons

Confirms values entered; activates parameters

Discards any values entered without saving; and closes messages

Back to basic display

Accesses all system information

Opens quick menu. Selection of functions depending on user level, configuration

and current status.

Tap to change parameters (dropdown menu or numeric keypad)

Operating the System

Operate the boiler using the touch display

Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com

Содержание T4e













































































Результаты поиска

Содержание T4e

Отзывы:

Похожие инструкции для T4e

Бренды по названию

Популярные бренды

Fröling T4e, Руководство по эксплуатации

Результаты поиска

Содержание T4e

Отзывы:

Похожие инструкции для T4e

Бренды по названию

Популярные бренды