14
Place the sensor array and indoor thermo-hygrometer transmitter about 1 to
3 meter from the receiver and wait several minutes for the remote sensors
to synchronize with the receiver. Once synchronized, the Indoor blue LED
(Figure 12, reference 2) and Outdoor blue LED (Figure 12, reference 3)
will be illuminated. The LED flash slowly indicating that there is no data
updated to receiver, you should re-set the receiver or sensors
The RF LED (Figure 13,reference 1)will be flashed several times
indicating that the RF signal is received, if no flashed mean that no RF
signal, you should re-set or re-power the receiver or sensor.
Figure 12 : Console LED indicator
Ref.
LED
Description
1
RF
On when radio frequency receiver is operating properly
2
Indoor
On when indoor sensor received
3
Outdoor
On when outdoor sensor array received
4
WIFI
On when connect to WIFI router via APPs
On when connected to internet hosting service
5
Power
AC Power connected
