![background image](http://html.mh-extra.com/html/froggit/wh1080se/wh1080se_manual_2338650004.webp)
- 4 -
mode from which all further settings can be performed by the user.
If no RCC signal is detected in the initial setup, the transmitter will try once
every 6 hours to get an RCC signal until a signal is received. Once the
transmitter receives the RCC signal it will transmit the signal to the monitor.
On the monitor the RCC icon will be displayed, if the monitor doesn
’
t receive
the RCC signal or loses the signal the RCC icon will not be display.
Register transmitter
If no outdoor weather data is displayed or the signal to the sensors is lost
during setting up, mounting, hold the RESET button of outdoor sensor and
re-insert the batteries of base station to synchronize the base station to
sensors. Without being synchronized, weather data will not be received.
NOTE: Wait two minutes before re-insert the batteries of transmitter for
proper reset.
Note:
The best condition for reception is at night, between midnight and 6:00am
–
when there is less atmospheric interference.
Getting Started
Setup Sensors
Figure 1