![background image](http://html1.mh-extra.com/html/frog/pool-frog-5400/pool-frog-5400_manual_2338622020.webp)
20
For Proper Performance
1) If using a multi-speed pump, run pump for at
least 6 hours per day at high speed (at least 40
gpm).
If the pump will run on low speed 24
hours per day or less than 6 hours per
day on high speed, you must bleed the
air while the pump is on by unscrewing
the cap knob until water appears. Then
screw the knob back on. Repeat this
process each time the cap is removed
for any reason.
2) Install system with 4-8 psi back pressure.
To prevent under or over chlorination,
use our pressure gauge with a special
fitting that allows you to use it in the air
vent hole on the product cap. Follow the
instructions that come with
the gauge for achieving the
correct pressure.
POOL FROG
®
CYCLER
POOL FROG
®
CYCLER
A. With High GPMS
Install T-fittings exactly as shown.
C. Pool and Spillover Spa Combination
B. With In-Floor Cleaner - TWo oPTIoNS
✙
B. With In-floor Cleaners
✙
✙
✙
✙
POOL FROG
®
CYCLER
Check
Valve
In-floor
cleaner valve
POOL WATER LEVEL
Flow
Flow
The best option is to have two lines.
One line with pump, filter, heater
and cycler and a second line with a separate pump for the in-floor cleaning
system (filter optional).
oPTIoN 1- A Two-line Installation
oPTIoN 2 - A 3-Way Valve Installation
POOL WATER LEVEL
POOL WATER LEVEL
POOL WATER LEVEL
POOL RETURN
3-way manual valve or 3-way motor valve plus controls
POOL FROG
®
CYCLER
POOL FROG
®
CYCLER
CHECK
VALVE
IN-FLOOR
CLEANER VALVE
IN-FLOOR
CLEANER VALVE
FILTER
PUMP
PUMP
FLOW
FLOW
PUMP
HEATER
FILTER
FILTER
line 1
line 2
3) Special installation:
• If water flow is higher than 80 gpm, see diagram A.
• If an in-floor cleaner is included with pool,
see diagram B, with two options. Preferred
installation is Option 1 with two separate lines.
• If set-up is a pool and spa combination with
common equipment, see diagram C.
• Any additional sanitizing equipment that is
installed with FROG
®
must be installed after
FROG
®
(never before) on the return line to the pool.
NOTE:
Over chlorination or damage to the
POOL FROG
®
Cycler or other equipment could
result if these special installations are not
used in these situations.
Questions?
Call Customer Service at 800-222-0169
Monday thru Friday, 8am to 5pm central standard time.