FRITZ!WLAN Repeater 310 Installation and Operation Instructions
5
3. Now press the “WLAN” button on the Fritz!Box within the next two minutes. Hold
the “WLAN” button down until the “WLAN” LED of the Fritz!Box begins flashing.
This takes about 6 seconds.
The connection between the Fritz!WLAN Repeater and the Fritz!Box has been
established when the LEDs that display the strength of the wireless radio signal stop
flashing and remain lit.
The Fritz!WLAN Repeater is preconfigured so that that the radio network
name (SSID) and WLAN key of the Fritz!Box are adopted automatically
upon connection with the Fritz!Box.
