Fritz! 20002908, Быстрый старт

Страница: 9 / 76

Configuring a LAN Connection
The table shows how to configure a LAN connection between the FRITZ!Repeat-
er and the FRITZ!Box on a computer. More configuration options are presented
in our PDF manual at
en.avm.de/service .
1
Plug the the FRITZ!Repeater into an electrical outlet.
2
Connect the FRITZ!Repeater to your computer using a LAN cable and wait until
the Connect LED starts flashing slowly.
3
Enter
http://fritz.repeater
in a web browser. The user interface of the
FRITZ!Repeater appears.
4
Follow the instructions of the wizard in the user interface until configuration is
complete, selecting
LAN bridge as the type of connection.
5
Connect the FRITZ!Repeater to your FRITZ!Box using a LAN cable.
As soon as the
Connection Quality
and
Connect
LEDs light up permanently, the
FRITZ!Repeater is ready for operation.
On a FRITZ!Box with FRITZ!OS 7.0 or higher, enable Mesh
1
Press the Connect button on the FRITZ!Repeater. The Connect LED flashes.
2
Within two minutes, confirm on your FRITZ!Box that Mesh has been enabled:
• FRITZ!Box with Connect/WPS , Connect or WPS button: Press button briefly
• FRITZ!Box with WLAN/WPS or WLAN button: Press button for at least
6 seconds
en.avm.de/mesh
9