3
Attaching devices
3.1 Assembly of PULVERISETTE 15
1.
Have 2 persons lift the mill on to the universal stand and position it
over the drilled holes displayed. The drilled holes marked in yellow
are suitable for PULVERISETTE 15 with larger motor.
CAUTION!
Secure the device against tipping over until it is
fastened completely. Due to its centre of gravity,
the mill will tilt forwards.
2.
Fasten the mill using the assembly set provided. The screws are
inserted from above with a washer and are locked from below with
a washer and a nut.
Attaching devices
- 7 -
