manualshive.com logo in svg

Fritsch ANALYSETTE 22 NeXT, Руководство по эксплуатации

Поделиться
Скачать
Fritsch ANALYSETTE 22 NeXT Скачать руководство пользователя страница 28

The measuring liquid in the supply unit only comes in contact with mate-

rials that are chemically resistant to a large extent. Certain organic liquids

or saturated inorganic salt solutions can be used temporarily without

damaging the instrument.
Please note that the measuring liquid comes into contact with stainless

steel, glass, PTFE, Viton (FPM or FKM) and silicon hoses.
When measuring samples which are incompatible with water, a suitable

liquid with a high boiling point can be selected from the following list:

n

Monovalent, bivalent or trivalent alcohols e.g. isopropanol

n

Benzines (e.g. white spirit),

n

Mineral and organic oils (e.g. petroleum and soy bean oil, nut oil,

olive oil, Miglyol)

n

Saturated solutions of inorganic salts

Samples, which are available in oil (e.g. oils like machine oil), do not

always need to be measured in oil. They can often be measured in white

spirit.

DANGER!
Before using other measuring liquids, consult Fritsch

Gmbh in advance or call up the list of suitable chemi-

cals on our homepage www.fritsch-sizing.de under the

corresponding wet dispersion unit.
We advise against the use of harmful, explosive or flam-

mable liquids.
The above list just states the chemical compatibility of

the device with the liquids that can be used.
The measuring unit and dispersion units are not

designed to be explosion-protected.

DANGER!
The following must not be used:
Ketones (e.g. acetone, propanone, butanone, cyclohex-

anone),
Ether, chlorofluorocarbons,
Amines, freone 21-32, methanol, aniline, benzol
Chlorinated hydrocarbons like acetic acid and its deriva-

tives, undiluted acids and bases.

DANGER!
When using harmful liquids be sure to observe the valid

safety regulations (MAC values). Where necessary, the

measuring unit and dispersion units must be set up in a

ventilated safety area.

 

Supply units

 

 

- 28 -

 

Содержание ANALYSETTE 22 NeXT

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды