GENERAL INSTRUCTIONS OF USE
- First remove the knives before pouring out the liquid in a bowl.
-
NEVER
put your hands or any sort of cooking utensils in the mixing bowl while the food processor is in use.
- Only use wooden, rubber or plastic cooking utensils.
NEVER
use force to push food down into the mixing bowl or
to remove food from the knives.
- Before removing the lid from the mixing bowl: turn off the appliance, wait till the motor has stopped completely,
and pull the plug from the socket.
- Precooked ingredients first need to be cooled down before adding them.
NEVER
fill the mixing bowl above max.
indication, chances of spilling or causing the motor to stop running will increase. If you do want to add hot
ingredients, be careful not to burn yourself on the mixing bowl, the damp or the spatters. If needed you can put a
kitchen towel over the lid to protect yourself.
-
NEVER
use the safety lock to fix the mixing bowl on the motor block as on/off switch for the food processor.
ALWAYS
use the ON/OFF switch.
II.
BEFORE FIRST USE
In the packaging you will find the food processor, 4 knife discs, 1 beater disc, 1 stainless steel knife, 2 plastic knives,
2 pressing cones, 1 top piece for the citrus press, spatula, top piece with filling shaft and the instruction manual.
Before first use, we advise to clean all the parts in soapy water, except for the motor block. This is best to be cleaned
with a moist cloth. You can only turn on the appliance when all parts/accessories are assembled correctly.
III.USE OF THE FOOD PROCESSOR
a. Use of the appliance
1.
Put the mixing bowl on the motor block and fix it with the safety brackets.
2.
Put the mixing gear on the gearbox in the mixing bowl.
3. USE OF THE KNIVES AND WHIPER DISC
: Put the knife/beater disc on the mixing gear. Then add the
ingredients.
CAUTION
:
ALWAYS
put the mixing bowl and the accessories on the motor block before adding food.
4. USE OF THE KNIFE DISCS
: put the disc on the mixing gear. Close the lid and then add the ingredients
through the filling shaft.
5.
Put the lid on the mixing bowl and fix it by turning the mixing bowl clockwise.
6.
Then fix the mixing bowl by turning clockwise
CAUTION
: the appliance does
NOT
work if
NOT
assembled correctly.
7.
Turn on the appliance and select the desired speed.
8.
Use the "Pulse Function" for short pulses. This function runs as long as you keep the button pushed.
9.
To remove the lid, accessories and mixing bowl, repeat the above mentioned steps in reverse.
CAUTION
: the mixing bowl is
NOT
suited for mixing hard ingredients, such as coffee beans, lumps of sugar...
b. Use of the food processor’s accessories
1. Synthetic dough knife small (14) and synthetic dough knife (13)
Put the dry ingredients in the mixing bowl and add the liquids through the filling shaft on the lid, while the
appliance is running. Let the appliance run until you achieve a smooth dough mix. To obtain a good result, you
have to knead the dough by hand after the yeasting process.
2. Stainless steel knife(12)
This is a multifunction accessory. For a really fine result you will have to let the appliance run for a longer time
than for a coarse result. To achieve a coarse result just as you wish, you can use the "Pulse function".
3. Beater disc (11)
Only use this disc to beat light textures, such as egg white, egg yolk + sugar, mayonnaise... heavier structures
such as grease and flower can damage the beater disc.
TIP
: to achieve the best result use eggs at room temperature. Make sure the mixing bowl as well as the beater
disc is completely clean.
