Frisco Citizen Скачать руководство пользователя страница 8

SAFETY INSTRUCTIONS FOR THE  BATTERY AND CHARGER

Your e-bike has a lithium-ion battery. Never charge the battery 
with a replacement charger which is not designed for this 
purpose. Using an unsuitable charger on a lithium ion battery 
could lead to overheating, 

fi

re or explosion. 

Keep the battery charged when your e-bike is not in use. You 
can charge the battery separately or directly on the e-bike.

Never charge the battery near 

fl

ammable materials. 

Never charge the battery near infants and small children. 

Remove any valuable objects from near battery while it is 
charging. 

The charging time depends on how full the battery was. If the 
battery was completely empty, it will take 4 to 6 hours before it 
is fully charged. When the battery is fully charged, the LED on 
the charger switches from red to green. You should now discon-
nect the charger from the battery.

Never leave the charger connected to the battery for an 
extended period. Lithium-ion batteries have very low discharge 
rates, they do not need to be connected to the charger all the 
time (charging overnight is safe). 

It is normal for the battery and the charger to get warm while 
charging. 

The battery is half charged when new. Please charge it as 
quickly as possible. The 

fi

rst three times, charge the battery for 

at least 12 hours. 

There is a control light on the charger. The red control light 
means that the battery is charging, the green one means that 
the battery is fully charged (the green light is also lit if no 
battery is connected). 

Please make sure that the charger voltage matches your local 
voltage.

The charger must always be used indoors. 

Charge the battery out of reach of children. 

Do not open the charger, it is a high-voltage unit. 

Never touch the two battery electrodes at the same time as this 
could cause an electric shock. 

Never take the battery out of the e-bike while it is charging. 

Please charge the battery for at least 2 hours every 2 months. 

Do not allow liquids or metals to penetrate into the charger.

Never use the charger in oily, dusty, dirty or damp environments. 
Avoid direct sunlight. 

Avoid using the charger in thunderstorms. 

Always use the charger in cool, well ventilated places. 

Never use the battery near heat sources such as open 

fi

res or 

fl

ames. 

Do not hit the battery and avoid strong vibrations. 

The warranty is voided if the battery is opened or damaged. 

Your e-bike is designed for normal road traf

fi

c and for a single 

person. 

Never use your e-bike for extreme maneuvers, such as extreme 
off-road use, jumps or excess load. This could damage the ebike 
and cause serious injuries.

Содержание Citizen
















Отзывы: