Hold the button shortly while in display 1 to enter
display 2. After 5 seconds in riding mode, display 2
will automatically retun to display 1.
3. Display 2
Hold the button shortly while in display 2 to
enter display 3. After 5 seconds in riding mode, a
single maximum speed (MXS) display will
automatically return to real riding speed (Km/H).
4. Display 3
After the power is on for 5 seconds, hold the and
the buttons at the same time. The maximum
riding speed MXS and KM/H will
fl
ash. Press the
same buttons shortly to set the maximum riding
speed (default 25KM/H). Press the button
shortly to go to the next parameter setting.
1. Set Maximum Riding Speed
Once you set the maximum riding speed, the wheel
diameter speci
fi
cation
fl
ashes. Press the or the
button shortly to set the speci
fi
cations of the wheel
diameter. Press the shortly to go to the next
parameter setting.
2. Wheel Diameter Setting
5.
In display 3, press button shortly to re-enter display 1.
6.
Hold button to turn off the display and the power supply of the
controller.
7.
Automatically prompt interface.
Once the wheel diameter is set, the KM/H and Km
will
fl
ash. Press the and the shortly to select
the metric units of speed and mileage.
3. Set the Metric Units
Display
Riding Speed
Total Distance
Metric
KM/H
Km
US
MPH
Mil
4.
KM/H and Km stop
fl
ashing after metric unit setting is complete.
Press the shortly again to re-enter the maximum riding speed
interface; or hold the to exit, save the settings and return to
display 1.
OPERATING INSTRUCTIONS
(continued)
GENERAL PROJECT SETTINGS
