Frigomat Twin lcd 35, Руководство по эксплуатации и техническому обслуживанию, Страница: 52 / 97

47 - ENGLISH
WASHING THE BATCH FREEZER GROUP
1. Remove the door by lifting the lever, rotate towards
the left and while holding it with one hand, use the
other to slide out the hinge knob. At this point the
door is free and can be disassembled.
2. Diassemble the door:
- Unscrew the handle adjustment knob
- Disassemble the guide and the spring
- Remove the extraction door
- Remove the O-rings
3. Slide out the mixer and the stuffing box: remove the
scraping blades and wash them carefully. Use the
cleaning rod to clean the seat of the blades on the
mixer.
4. Wash all the above-described components with a
detergent /sanitizing solutions. Let air dry.
5. Carefully sanitize the cooling cylinder.
6. Remove the drip tray from the front panel and wash
it carefully. If the drip tray contains mixtures it
means the mixer’s stuffing box leaks and needs to
be replaced.
7. Lubricate the O-ring’s and the stuffing box using the
FRIGOMAT lubricator only (supplied with the
machine). We also recommend replacing the
mixer’s stuffing box weekly to allow the rubber to
recover its elasticity.
- To maintain the plastic parts and the gaskets in
good conditions, do not use solvents and/or any
type of thinning substances during washing cycles.
- Sanitizing chemicals shall be used according to
laws in force and with the utmost caution
.
- After any sanitizing operation, it is indispensable
not to touch the sterilized parts either with hands
or with towels, sponges or other.
- Avoid making the mixer run empty, as the machine
can be damaged.