Frigidaire PRFC2383AF, Инструкция по использованию и уходу

Страница: 9 / 50

9

NOTE
If your refrigerator is placed with the
door hinge side against a wall, you may
have to allow additional space so the
door can be opened wider.

NOTE
Product is shipped with doors adjusted
to the lowest position on the hinges.
INSTALLATION
Door opening
Your refrigerator should be positioned
to allow easy access to a counter
when removing food. For best use of
refrigerator drawers and freezer baskets,
the refrigerator should be in a position
where both can be fully opened.
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
four sides and that cabinet is stable.
4. After unit is leveled, lower the anti-
tip leg until it firmly contacts the
floor. An adjustable wrench may be
necessary for adjustment.
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for final positioning of refrigerator:
• All four corners of the cabinet must
rest firmly on the floor.
• The front should be slightly elevated
to ensure that doors close and seal
properly.
• Doors should align with each other
and be level.
Most of these conditions can be met by
raising or lowering the adjustable front rollers.
To level the cabinet using the front rollers:
1. Slightly open freezer drawer to
reveal adjustable rollers at bottom of
cabinet.
2. Use the front roller height adjusting
screws to make initial cabinet
adjustments. Use a 3/8 inch socket
wrench to turn the adjustment
screws (1 per side).
To raise unit : Turn adjustment
screw clockwise.
To lower unit : Turn adjustment screw
counterclockwise.
Door Door
To make final door height adjustments:
1. Open freezer drawer to access
hinges for fresh food doors.
2. Insert 6mm Allen
TM
wrench into the
shaft of the lower hinge. (Included
with unit)
To lower door
: turn adjustment
screw counter-clockwise if looking
at the door from below.
To raise door
: turn adjustment
screw clockwise if looking at the
door from below.
Raise
Lower
Anti-tip
Leg