Frigidaire PRFC2383AF страница 26 Скачать руководство пользователя

Страница: 26 / 50

Cleaning the ice maker

Clean the ice maker and ice bin at regular

intervals, especially prior to vacation or

moving.

CAUTION

NEVER use an ice pick or similar sharp

instrument to break up the ice. This

could damage the ice bin and dispenser

mechanism.
To loosen stuck ice, use warm water.

Before replacing the ice bin, make sure

it is completely dry.

IMPORTANT

When removing or replacing the ice

bin, avoid rotating the auger in the ice

bin. If the auger is accidentally rotated,

you must realign the auger by turning

it in 45 degree turns (see below) until

the ice bin fits into place with the drive

mechanism. If the auger is not properly

aligned when replacing the ice bin, the

refrigerator will not dispense ice. The

refrigerator door also may not close

properly causing warm air to leak into

the refrigerator compartment.

AUTOMATIC ICE & WATER DISPENSER

Removing Ice Bin

1. Turn off the ice maker.
2. Lift the ice bin upward then pull

straight out to remove.

3. Empty and carefully clean the ice

bin with mild detergent. Do not use

harsh or abrasive cleaners. Rinse

with clean water.

4. Allow the ice bin to dry completely

before replacing in the freezer.

5. Replace the ice bin. Turn the ice

maker on.

Remove and empty the ice bin if:

• An extended power failure (one hour

or longer) causes ice cubes in the

ice bin to melt and refreeze together

after power is restored, jamming the

dispenser mechanism.

• You do not use the ice dispenser

frequently. Ice cubes will freeze

together in the bin, jamming the

dispenser mechanism.

Adjusting Ice Bin Auger

Auger

External Dispenser -Refrigerator Ice Maker

Содержание PRFC2383AF



















































Результаты поиска

Содержание PRFC2383AF

Отзывы:

Похожие инструкции для PRFC2383AF

Бренды по названию

Популярные бренды

Frigidaire PRFC2383AF, Инструкция по использованию и уходу

Результаты поиска

Содержание PRFC2383AF

Отзывы:

Похожие инструкции для PRFC2383AF

Бренды по названию

Популярные бренды