8
Auto Safety Shut-Off Mechanism
•
This fireplace is equipped with a safety shut-off feature which initiates if the fireplace
overheats (e.g. Due to blocked air vents). For safety reasons, the fireplace will NOT
automatically reset, and will need to be manually turned ON.
•
To restart the fireplace, unplug the fireplace from the power outlet for at least 15 minutes.
Next, reconnect to the power outlet and turn on the fireplace.
Troubleshooting
Problem
Possible Solution
Unit does not work / does not heat
·
Check if the unit is plugged in the power
outlet.
·
Check if the unit is in Standby mode. If so,
turn the unit ON.
·
Check if the heat is turned OFF.
·
Check for safety cut-off operation.
No flame effect
·
Check if the unit is plugged in the power
outlet.
·
Check if the unit is in Standby mode. Turn
the unit ON.
Cleaning & Maintenance
•
Disconnect from the power supply before attempting any maintenance or cleaning in
order to reduce the risk of fire, electric shock to persons or damage to property.
•
Warning
- Always disconnect from the power supply before cleaning fireplace.
•
For general cleaning, use a soft, clean duster. Never use abrasive cleaners. The glass
viewing screen should be cleaned thoroughly with a soft cloth. Do
NOT
use proprietary
glass cleaners.
•
Periodically check all fixings and tighten if necessary.
•
The LED bulbs inside can NOT be replaced.
Technical Specification
•
Supply: 120V
~
60Hz
•
Rated Power: 1500W
•
Bulb: LED (cannot be replaced)
