4
Read all instructions before using this air conditioner
For Your Safety
Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance. Read product labels for
flammability and other warnings.
Prevent Accidents
Be sure the electrical service is adequate for the model you have chosen.
This information can be found on the serial plate, which is located either on
the side of the cabinet or behind the grille.
If the air conditioner is to be installed in a window, you will probably want to
clean both sides of the glass first. If the window is a triple-track type with a
screen panel included, remove the screen completely before installation.
Be sure the air conditioner has been securely and correctly installed
according to the separate installation instructions provided with this
manual. Save this manual and the installation instructions for possible
future use in removing or reinstalling this unit.
When handling the air conditioner , be careful to avoid cuts from sharp
metal fins on front and rear coils.
To reduce the risk of fire, electrical shock, or injury to persons when using
your air conditioner, follow basic precautions, including the following:
Electrical Information
Be sure the air conditioner is properly grounded. To minimize shock and fire
hazards, proper grounding is important. The power cord is equipped with a
three-prong grounding plug for protection against shock hazards.
Your air conditioner
be used in a properly grounded wall receptacle. If
the wall receptacle you intend to use is not adequately grounded or
protected by a time delay fuse or circuit breaker, have a qualified electrician
install the proper receptacle.
Do not run air conditioner with outside protective cover in place. This could
result in mechanical damage within the air conditioner.
must
Do not use an extension cord or an adapter plug.
The complete electrical rating of your new room air conditioner is stated on
the serial plate. Refer to the rating when checking the electrical requirements.
Avoid fire hazard or
electric shock. Do not use an
extension cord or an adaptor plug.
Do not remove any prong from the
power cord.
The power supply cord
with this air conditioner contains a
current detection device designed
to reduce the risk of fire.
Please refer to the section
“Operation of Current Device” for
details.
In the event that the power supply
cord is damaged, it cannot be
repaired it must be replaced with a
cord from the Product
Manufacturer.
Grounding type
wall receptacle
Do not, under
Any circumstances,
cut, remove,
or bypass the
grounding prong
Power supply cord with
3-pr
grounding plug
and current detection
device
ong
READ THIS SECTION BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER.
Operation of Current
Device
The power supply cord contains a current device that senses damage to the power
cord. To test your power supply cord do the following:
Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST
button. You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit.
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST
button is pushed, or it cannot be reset. A new one can be obtained from the
product manufacturer.
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced
by one obtained from the product manufacturer.
1.
NOTES:
?
?
?
?
Plug in &
press RESET
NOTE: Some plugs have
buttons on the side
Important Safety
Instructions
