2
Installation Instructions
CUTOUT DIMENSIONS
On 27
″
(68.6 cm) models, allow 1
″
(2.5 cm) at the top,
11
⁄
16
″
(1.75 cm)on the sides and 1
3
⁄
8
″
(3.5 cm)at the
bottom for overlap of the Trim Frame over the edges
of the cutout.
On 30
″
(76.2 cm) models, allow 1
″
(2.5 cm) at the top,
2
3
⁄
16
″
(5.6 cm) on the sides and 1
3
⁄
8
″
(3.5 cm) at the
bottom for overlap of the Trim Frame over the edges
of the cutout.
1
.
* Min. depth with receptacle outside cabinet 19
1
⁄
2
″
(49.5 cm).
Min. depth with receptacle inside cabinet 22
″
(56 cm).
Depth
Height
3
″
Min.
(7.6 cm)
Width
Models
27
″
30
″
(68.6 cm)
(76.2 cm)
Height
16
3
⁄
4
″
16
3
⁄
4
″
(42.5 cm)
(42.5 cm)
Width
25
1
⁄
2
″
25
1
⁄
2
″
(6.5 cm)
(6.5 cm)
Depth (min.)*
19
1
⁄
2
″
or 22
″
19
1
⁄
2
″
or 22
″
(49.5 cm or
(49.5 cm or
56 cm)
56 cm)
INSTALL BOTTOM BRACKET
AND BOTTOM DUCT
Disconnect the microwave oven before proceeding
with the installation.
Fasten the bottom bracket to the bottom duct by
using two
1
⁄
2
″
screws.
Remove any loose items inside the microwave oven,
including the turntable and turntable support.
Carefully turn the microwave upside down.
Install bottom duct with four
1
⁄
2
″
screws as shown.
Microwave Oven Upside Down
D
C
B
A
2
.
Front
Rear
1
⁄
2
″
Screws (2)
Screws
Screws
