background image

22

Setting Oven Controls

 To set the oven to broil at the default setting (550°F):

1.

Place the broiler pan insert on the broiler pan. Then place the food
on the broiler pan insert. DO NOT use the broiler pan without the
insert.  DO NOT cover the broiler insert with foil. The exposed
grease could ignite (See Fig. 6).

2.

Arrange the interior oven rack and place the broiler pan on the
rack.  Be sure to center the broiler pan directly under the broiler
element. Make sure the oven door is in the broil stop position
(See Fig. 5).

3.

Press 

 .  "BROIL" will flash and "550°" will appear (Fig. 1).

4.

If a lower broil temperature is desired (minimum broil temperature
setting is 400°F), press the desired temperature before continuing
to step 5.

5.

Press 

 . The oven will begin to broil. "BROIL" and "550°" will

appear in the display (Fig. 2).

6.

Broil on one side until food is browned; turn and cook on the
second side. Season and serve. Note: Always pull the rack out to
the stop position before turning or removing food.

7.

To cancel broiling or if finished broiling press 

 (Fig. 3).

Broiling Table (Refer to Fig. 4)

Food

Rack

Temp

Cook Time

Item

Position

Setting

1st side

2nd side

Doneness

Steak 1" thick

5th or 6th

550° F

7:00

5:00

Medium

5th or 6th

550° F

8:00

6:00

Medium-Well

Pork Chops 3/4" thick

5th

550° F

8:00

6:00

Well

Chicken - Bone In

4th

450° F

20:00

10:00

Well

Chicken - Boneless

5th

450° F

8:00

6:00

Well

Fish

5th

500° F

13:00

n/a

Well

Shrimp

4th

550° F

5:00

n/a

Well

Hamburger 1" thick

6th

550° F

9:00

7:00

Well

5th

550° F

10:00

8:00

Well

INSTRUCTIONS

PRESS

DISPLAY

  Should an oven fire occur, leave the oven door closed and turn the oven OFF. If the fire continues, throw

baking soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and water
can cause a grease fire to spread and cause personal injury.

Use the following table for approximate broiling times. Increase or decrease broiling times, or
move the broiling pan to a different rack position to suit for doneness. If the food you are
broiling is not listed in the table, follow the instructions provided in your cookbook and watch
the item closely.

Fig. 1

Fig. 2

Fig. 3

Broil

Stop Position

Fig. 5

Fig. 6

some models

Recommended Broiling Times

 To insure proper results when broiling use ONLY Electrolux Home Products, Inc. approved Broil Pan

& Insert.

The broiler pan and the insert (if equipped) allows grease to drain and be kept away from the high heat of the broiler. DO
NOT
 use the pan without the insert. DO NOT cover the insert with foil; the exposed grease could ignite. DO NOT use the
broil pan without the insert or cover the insert with aluminum foil. The exposed fat could ignite.

The  

  pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even coverage.

The Broil feature is preset to start broiling at 550°F however, the Broil feature temperature may be set at any temperature
between 400°F and 550°F. For optimum browning results when broiling, preheat the broil element for 3-4 minutes.

Fig. 4

Setting Broil

5

4

6

Содержание GLEMF397DBA









































Отзывы: