28
CARE AND CLEANING
Care & Cleaning Tips
Part
What To Use
Tips and Precautions
Interior &
Door Liners
• Soap and water
• Baking soda and water
Use 2 Tbsp of baking soda in 1 qt
of warm water.
Be sure to wring
excess water out of sponge or cloth
before cleaning around controls,
light bulb or any electrical part.
Door Gaskets
• Soap and water
Wipe gaskets with a clean soft cloth.
Drawers & Bins
• Soap and water
Use a soft cloth to clean drawer
runners and tracks.
Glass Shelves
• Soap and water
• Glass cleaner
• Mild liquid sprays
See
in
CARE AND
CLEANING
before cleaning. Allow
glass to warm to room temperature
before immersing in warm water.
Toe Grille
• Soap and water
• Mild liquid sprays
• Vacuum attachment
Vacuum dust from front of toe grille.
Remove toe grille (see Installation
Instructions). Vacuum backside,
wipe with sudsy cloth or sponge.
Rinse and dry.
Exterior & Handles
• Soap and water
• Non Abrasive Glass
Cleaner
Do not use commercial household
cleaners containing ammonia,
bleach or alcohol to clean handles.
Use a soft cloth to clean smooth
handles.
DO NOT use a dry cloth to
clean smooth doors.
Exterior & Handles
(Stainless Steel
Models Only)
• Soap and water
• Stainless Steel Cleaners
Never use CHLORIDE or cleaners
with bleach to clean stainless steel.
Clean stainless steel front and
handles with non-abrasive soapy
water and a dishcloth. Rinse with
clean water and a soft cloth. Use a
non-abrasive stainless steel cleaner.
These cleaners can be purchased at
most home improvement or major
department stores. Always follow
manufacturer’s instructions. Do not
use household cleaners containing
ammonia or bleach.
NOTE: Always clean, wipe and dry
with the grain to prevent scratch-
ing.
Wash the rest of the cabinet
with warm water and mild liquid
detergent. Rinse well, and wipe dry
with a clean soft cloth.
Replacing
LED Bulbs
• Unplug refrigerator
• Wear gloves
• Replace the Refrigera-
tor light cover by slid-
ing the cover forward
along the top
• Replace old LED bulb
• Replace light cover
• Plug in the refrigerator
CAUTION: Wear gloves when replac-
ing LED bulbs to avoid getting cut.
Use only a 5-watt or less AC LED
light bulb.