23
Care & Cleaning
(continued)
Freezer Light Replacement
Wear gloves when replacing light
bulbs to avoid getting cut.
REPLACING LIGHT BULBS
1.
Unplug refrigerator.
2.
Wear gloves as protection against possible broken
glass.
3.
Remove light cover, if necessary.
4.
Unscrew and replace old bulb with an appliance bulb
of the same type and wattage.
5.
Replace light cover, if necessary.
6.
Remember to plug the refrigerator back in.
Refrigerator Light
Located behind
control panel
Crisper Light Replacement (Models may vary)
Refrigerator Light Replacement
Vacation and Moving Tips
Short
Vacations
•
Leave refrigerator operating during vacations of 3 weeks or less.
•
Use all perishable items from refrigerator compartment.
•
Turn automatic ice maker off and empty ice bucket, even if you will only be
gone for a few days.
Long
Vacations
•
Remove all food and ice if you will be gone one month or more.
•
Turn off automatic ice maker and turn water supply valve to closed position.
•
The On/Off button on the Electronic Control only controls your refrigerator’s
cooling system. To turn off power to your refrigerator you must unplug the
power cord from the wall outlet.
•
Clean interior thoroughly.
•
Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
Moving
•
Remove all food and ice.
•
If using handcart, load from side.
•
Adjust rollers all the way up to protect them during sliding or moving.
•
Pad cabinet to avoid scratching surface.
IMPORTANT:
If the refrigerator is going to be stored or moved in freezing temperatures, the water in
the ice and water system must be drained completely. Failure to do so could result in water leaks when
the refrigerator is put back into service. Contact a service representative to perform this operation.
or
Light Socket
Located Behind
Left Rear
of Crispers
Light Bulb
Crisper Light
Cover
