6
BEFORE USING YOUR WATER KETTLE
USING YOUR WATER KETTLE
Before using your water kettle for the first time
1. Remove all packaging material and any stickers, tags,
or tape from the kettle and base.
2. Be sure the mesh filter is in place behind the pouring
spout.
3. Place the base on a flat, level, and stable surface and
insert plug into an approved electrical outlet.
4. Press center button to open lid. Fill kettle to the
maximum level; press lid until it snaps closed. Place
kettle on the base.
5. Press the temperature selector until the display shows
212°F; then press Start/Stop.
6. After the water has come to a boil, allow the water to
cool to a safe temperature and discard. Your kettle is
now ready for use.
To Boil Water
1. Fill the kettle with water to the
desired level (between the minimum
and maximum).
2. Place the kettle on the base. Be sure
the base is on a flat, level, stable
surface and is plugged into an
approved electrical outlet.
3. Press the temperature selector until
212°F is reached.
4. Press Start/Stop button. The actual
temperature will be displayed as the
kettle heats up.
5. When the water reaches 212°F, the
kettle will beep and then shut off.
6. To turn the kettle off at any time
during use, press the Start/Stop
button.
175 185 195 200 212 ºF
79 85 91 93 100 ºC
temp
start / stop
keep
warm
