background image

26

MAJOR APPLIANCE LIMITED WARRANTY

Exclusions
This warranty does not cover the following:

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

If You Need 

Service

Canada

1.800.265.8352

Electrolux Canada Corp.

5855 Terry Fox Way

Mississauga, Ontario, Canada

L5V 3E4

USA

1.800.944.9044

Electrolux Major Appliances

10200 David Taylor Drive 

Charlotte, NC 28262

Your appliance is covered by a limited one-year warranty for functional repairs only. For one year from your 

original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that 

prove to be defective in materials or workmanship when such appliance is installed, used and maintained in 

accordance with the provided instructions. After one year from your original date of purchase, the consumer 

will be responsible for diagnostic, labor and parts costs as well as any removal, transportation and 

reinstallation expenses which are incurred during service on components.

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT 

REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING 

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE 

YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX 

SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE 

AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR 

ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR 

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF 

IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN 

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY 

FROM STATE TO STATE.

Keep your receipt, delivery slip, or some other appropriate payment record to establish the 

warranty period should service be required. If service is performed, it is in your best interest to 

obtain and keep all receipts. Service under this warranty must be obtained by contacting 

Electrolux at the addresses or phone numbers below.

This limited warranty only applies in the USA and Canada. In the USA, your appliance is warranted by 

Electrolux Major Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your 

appliance is warranted by Electrolux Canada Corp. Electrolux authorizes no person to change or add to any 

obligations under this warranty. Obligations for service and parts under this warranty must be performed by 

Electrolux or an authorized service company. Product features or specifications as described or illustrated are 

subject to change without notice.

1. Products with original serial numbers that have been removed, altered or cannot be readily determined.
2. Product that has been transferred from its original owner to another party or removed outside the USA or 

Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased "as-is" are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances 

not in ordinary household use or used other than in accordance with the provided instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, 

etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or 

knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip 

charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to 

floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than 

genuine Electrolux parts or parts obtained from persons other than authorized service companies; or 

external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.

Содержание FHPC102AC1





























Отзывы: