background image

Record Your Model and Serial Numbers

Record in the space provided below the model and serial numbers. On all models, the
serial plate is located on the outside of the cabinet.

Model No.

Serial No.

Register Your Product

The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,
signed and returned to the Frigidaire Company.

Normal Sounds

Today’s high efficiency compressors
may have a high pitched chatter
during the cooling cycle. 

High pitched Chatter

Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation. 

Vibration

Sound of Rushing Air

At the front of the unit, you may
hear the sound of rushing air
being moved by the fan. 

Gurgle/Hiss

“Gurgling or hissing” noise may be 
heard due to refrigerant passing 
through evaporator during normal 
operation. 

Product Registration 

4

Product Registration, Packaging & Normal Sounds

2009 Electrolux Home Products, Inc.

All rights reserved.

Packaging

Remove all packaging from inside the carton, along with any
inserts placed into the side louvers.
Remove the plastic ties and foam pad that secure the 
compressor to the fan shroud (where applicable). See diagram. 

foam pad + plastic ties

Packing Inserts

Pinging or Swishing

Droplets of water hitting condenser
during normal operation may cause
“pinging or swishing” sounds. 

Note: Don’t try to drill any holes 
on the base pan to eliminate the 
normal sounds, otherwise it will 
void the warranty.

Содержание FFRH1122U1














Отзывы: