22
CLEANING AND CARE
To avoid risk of personal injury or property damage, do
not
operate
oven
hood
without
filters
properly
in
place.
Cleaning the exhaust filters
The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
1. To remove the exhaust ventilation filters, slide the filter to
the rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry or wash in
Do not use ammonia. The aluminum
on the filter will corrode and darken.
3. To reinstall the exhaust ventilation filter, slide it into the
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.
Front
Rear
Surface lights
Ventilation
filters
Surface light replacement
To avoid risk of personal injury or property damage, wear
gloves when replacing the light bulbs.
1. Unplug the microwave oven or turn off power at the main
circuit breaker.
2. Remove the
cover moun ting
screw
under the
microwave.
Tab
Disconnect the power cord or leave the door open to deactivate the oven
during cleaning. Disconnect the power cord before replacing filters and lights.
light
LED
3.
Remove the LED light mounting screw.
4.
Unplug the LED light from the harness,
replace with part 5304499540.To order parts
call 800-599-7569.Then reconnect the harness.
7. Plug the microwave back into the power supply or
power back on at the main circuit breaker.
turn the
5.
Re-install LED light and mounting screw. WW
6.
Re-install LED light cover and mounting screw.
When re-installing mounting screw be careful
not to damage the LED light.
To order parts call 800-599-7569
Vent exhaust filter part number
5304478913
