5
Care and Cleaning
Between Defrostings
To avoid frequent defrosting, occasionally use a plastic scraper to remove frost.
Scrape with a pulling motion. Never use a metal instrument to remove frost.
Defrosting
It is important to defrost and clean freezer when ¼ to ½ inch of frost has accu
-
mulated. Frost may tend to accumulate faster on upper part of the freezer due
to warm, moist air entering the freezer when the door is opened. Remove food
and leave the door open when defrosting the freezer.
If the frost is soft, remove it by using a plastic scraper. If the frost is glazed and
hard, fill deep pans with hot water and place them on the freezer bottom. Close
the freezer door. Frost should soften in about 15 minutes. Repeat this procedure
if necessary.
Cleaning the Inside
After defrosting, wash inside surfaces of the freezer with a solution of two
tablespoons of baking soda in one quart (1.136 liters) warm water. Rinse and
dry. Wring excess water out of the sponge or cloth when cleaning in the area of
the controls, or any electrical parts.
Wash the removable parts with the baking soda solution mentioned above, or
mild detergent and warm water. Rinse and dry.
Never
use metallic scouring
pads, brushes, abrasive cleaners, or alkaline solutions on any surface. Do not
wash removable parts in a dishwasher.
Cleaning the Outside
Wash the cabinet with warm water and mild liquid detergent. Rinse well and
wipe dry with a clean soft cloth. Replace parts and food.
Vacation and Moving Tips
Short Vacations:
Leave the freezer operating during vacations of less than
three weeks.
Long Vacations:
If the freezer will not be used for several months, remove
all food and unplug the power cord. Clean and dry the interior thoroughly. To
prevent odor and mold growth, leave the freezer door open slightly, blocking it
open if necessary.
Moving:
Disconnect the power cord plug from the wall outlet. Remove foods,
then defrost, and clean the freezer. Secure all loose items such as base panel,
baskets, and shelves by taping them securely in place to prevent damage. In
the moving vehicle, secure freezer in an upright position, and secure to prevent
movement. Also protect outside of freezer with a blanket, or similar item.
Damp objects stick to cold metal
surfaces. Do not touch interior metal
surfaces with wet or damp hands.
Caution
Freezer must be unplugged (to avoid electrical hazard) from power
source when defrosting unit.
