9
Care & Cleaning
(Cleaning Chart)
Cleaning Various Parts of Your Cooktop
Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS
AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANING WILL REDUCE THE NUMBER OF MAJOR
CLEANING LATER.
How to Clean
Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth.
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar
and water. Follow by rinsing the area with clean water; dry and polish with a soft cloth.
Glass cleaners may be used if sprayed on a soft cloth first.
DO NOT
spray liquids directly
on the control pad and display area. Do not use large amounts of water on the control panel
- excess water on the control area may cause damage to the appliance. Do not use other
liquid cleaners, abrasive cleaners, scouring pads, or some paper towels - they will damage
the finish.
Wipe the control panel clean after each use. Before cleaning the control panel, turn all
controls to OFF and remove the control knobs. To remove, pull each knob straight off the
shaft. Clean using hot, soapy water and a cloth. Be sure to squeeze excess water from the
cloth before wiping the panel; especially when wiping around the controls. Excess water
in or around the controls may cause damage to the appliance. To replace knobs after
cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place.
Surface elements can be unplugged and removed to make cleaning the drip bowls easier.
The surface elements clean themselves when they are turned on. Food spilled on a hot
element will burn off. Food spilled on a cool element can be cleaned with a damp cloth—
any remaining soil will burn off the next time the element is used. NEVER IMMERSE A
SURFACE ELEMENT IN WATER. To remove surface elements and drip bowls, follow the
instructions under
General Cleaning
.
To clean drip bowls, wash in hot, soapy water or in the dishwasher. Rinse and dry while still
warm. Hard-to-remove, burned-on soils can be removed by soaking the drip bowls for about
20 minutes in a slightly diluted liquid cleanser or a solution made of equal parts ammonia
and water. A nylon scrubber may be used after soaking.
DO NOT
use abrasive cleansers
or steel wool, as they will scratch the surface. Always rinse with clean water and polish,
and dry with a soft cloth or paper towel. To replace drip bowls and surface elements, follow
the instructions under
General Cleaning
.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1 solution
of clear water and ammonia.
If necessary, cover difficult spots with an ammonia-soaked
paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub
with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth or paper towel.
Remove all cleaners or the porcelain may become damaged during future heating.
DO NOT
use spray oven cleaners on the cooktop.
Clean
stainless steel
with hot, soapy water and a dishcloth. Rinse with clean water and
a cloth.
Do not use cleaners with high concentrations of chlorides or chlorines.
Do
not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made for
cleaning stainless steel. Always be sure to rinse the cleaners from the surface as bluish
stains may occur during heating that cannot be removed.
See
Ceramic-Glass Cooktop
in this Owner's Guide.
Surfaces
Aluminum
(Trim Pieces)
Glass, Painted and Plastic
Control Knobs, Body Parts,
and Decorative Trim
Control Panel
Surface Elements and Drip
Bowls
Porcelain Enamel
Cooktop
Stainless Steel, Chrome
(brushed)
Decorative Trim Cooktop
Ceramic -Glass
Cooktop
Содержание FEC30S7EB - on 30" Smoothtop Electric Cooktop
Страница 13: ...13 Notes ...
