7
OPERATING INTRUCTIONS
Instructions for adding water to the water tank.
NOTE
•
Please clear any remaining water collected at the bottom of
the water tank when the machine is not in use.
•
When adding water to the tank or cleaning it, the power plug
should be removed from the outlet.
•
Before you turn on the fan, make sure the pump module is
fixed into place.
•
There are two ways to add water to the water tank:
1.
Add water directly into the water tank. Make sure that the
water pump is properly placed inside.
2.
Add water to the small chamber located above the
cooling pad. The water will filter down into the water tank.
Instructions for cleaning the water tank once disassembled.
1.
The water tank buckle should be
unlocked to the horizontal state.
2.
Pumped out any remaing water
until the tank is empty. Proceed
by pulling out the water tank
from the fan.
3.
Separate the water tank from
the pump module (including
water tube) by turning the knob
90 degrees counterclockwise.
4.
Clean the water tank and
replace the water tank to
it’s
location at the bottom of the
fan.
