Frigidaire FASC09F2MBHLW, Инструкция по эксплуатации

Страница: 25 / 29

47 48
Adjusting air flow direction
Adjust the air flow direction properly
otherwise, it might cause discomfort or
cause uneven room temperatures. Adjust
the horizontal louver using the remote
controller. Adjust the vertical louver
manually.
Adjusting the vertical air flow direction
(up - down)
The air conditioner automatically adjusts
the vertical air flow direction in
accordance with the operating mode.
To set the horizontal air flow direction
(left/ right)
Adjust the vertical louver manually using
the lever on the left or right side of the
vertical louver arm (Depending on model).
Take care not to catch fingers on the fan,
horizontal louver or to damage vertical
louvers. When the air conditioner is in
operation and the horizontal louver is in a
specific position, move the lever at left (or
right, depending on model) end of the air
outlet to the desired position.
To automatically swing the air flow
direction (up/down)
Perform this function while the air
conditioner is in operation.
Press the SWING button on the remote
controller.
To stop the function, press the SWING
button again.
Press AIR DIRECTION button to lock
louver in desired position.
The AIR DIRECTION and SWING buttons
Manual operation (without remote control)
Manual operation can be used
temporarily in case you can not find
the remote controller or its batteries
are exhausted.
1. Open and lift the front panel up to
an angle until it remains fixed with
a clicking sound. For 24K Btu
model, please use suspension
bars to prop up the panel.
2. Once you push the manual button,
the operation mode is shifted in an
order as: AUTO, COOL, OFF.(The
default setting temperature is 24.
3. Close the panel firmly to its
original position.
Manual control
button
This is used for testing purposes only.
To restore the remote controller
operation, use the remote controller
directly.
Auto/Cool
Attention