Frigidaire FAK127P1V, Инструкция по использованию и уходу

Страница: 8 / 11

Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep
Check
Filter Check
Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep
Check
Filter Check
Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep
Check
Filter Check
Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Sleep Sleep
Check
Filter Check
Filter
Temp/Timer Temp/Timer
Fan Fan
Temp/Timer Temp/Timer
Timer Timer
On/Off On/Off
Temp/Timer Temp/Timer
Fan Fan
Temp/Timer Temp/Timer
Timer Timer On/Off On/Off
Air Conditioner features
(continued)
TIMER: DELAY STOP/START
FEATURE: YOU WILL SEE:
DO THIS:
PRESS TIMER
BUTTON
SLEEP FEATURE: YOU WILL SEE:
DO THIS:
PRESS
SLEEP
BUTTON
NOTE: In this “ MODE ” the selected temperature will
increase by 2 F 30 minutes after the mode is selected.
The temperature will then increase by another 2 F after an
additional 30 minutes. This new temperature will be
maintained for 7 hours before it returns to the originally
selected temperature. This ends the "Sleep" MODE and
the unit will continue to operate as originally programmed.
The "Sleep" MODE program can be cancelled at any time
during operation by again pressing the "Sleep" button.
CHECK FILTER FEATURE: YOU WILL SEE:
NOTE : This feature is a reminder to clean the Air Filter
(See Care and Cleaning) for more efficient operation. The
LED (light) will illuminate after 250 hours of operation. To
reset after cleaning the filter, press the
“ Check Filter ”
button and the light will go off.
NOTE: For Delay Stop, the unit must be in the ON position.
NOTE: For Delay Start, the unit must be in the OFF position.
To adjust timer setting, tap or hold the UP arrow ( ) or the
DOWN arrow ( ) to change delay timer at 5 hour
increments, up to 10 hours, then at 1 hour increments up to
24 hours. The control will count down the time remaining
until start ( 8, 7.5, 7, etc.). The Delay Start mode
automatically selects cooling at high Fan Speed. The
temperature maintained will be the same as previously set.
To change the set temperature, press "COOL" then Up or
Down arrows until the desired temperature is indicated on
the display. After 5 seconds, the control will automaticall y
change the display back to the hours remaining until the
unit will start/stop. Turning the unit "ON" or "OFF"
at any
time will cancel the Delay Start/Stop function.
THEN DO THIS:
PRESS UP ( ) OR
DOWN ( ) BUTTON
LIGHT ON
LIGHT ON
LIGHT ON
8