7
rest. do not wrap the cord too tight as this could damage
the cord.
Using the Water Mist
1
Whether dry or steam ironing, press the Water Mist button
while ironing to spray a mist of water onto the fabric in front
of the iron.
2
iron over the moistened fabric to dry.
Using the Steam Burst
1
ensure that the Water Reservoir is no less than a quarter full.
2
Whether dry or steam ironing, press the steam burst/
Vertical steam button to deliver a burst of steam through the
soleplate.
3
allow 3 seconds between consecutive bursts of steam.
vertical Steaming
1
fill the Water Reservoir, plug in the iron and select the fabric
type according to the steps above.
2
place garment on clothing hanger.
3
once the Ready indicator illuminates, hold the iron vertically
with the soleplate close to the garment but not touching it.
4
While pulling the garment tight, press the steam burst/
Vertical steam button to release a burst of steam into the
garment. Move the iron across the garment while pressing
the steam burst/Vertical steam button in 3 second intervals.
5
to prevent the risk of burns, keep your hand away from the
area being steamed. to prevent the risk of injury, do not
steam garments while they are being warn.
