28
CARE AND CLEANING
To replace the oven door:
1.
Firmly grasp both sides of oven door along the door
sides. Do not use the oven door handle (
Figure 34
).
2.
Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame
(
Figure 34
). The hook of the hinge arms must be fully
seated onto the roller pins.
3.
Fully open the oven door, horizontal with floor
(
Figure 32
).
4.
Lift and turn/push the levers on both of the door hinge
locks up towards and into the oven frame to the locked
position (
Figure 33
).
5.
Close the oven door.
Replacing the Oven Light
Replacing the oven interior light bulb:
The interior oven light is located at the rear of the oven
cavity. The glass cover must be in place whenever the oven
is in use (
Figure 36
). Only use lamps with the same specifi-
cations.
1.
Put a cloth on the bottom of the interior of the appliance.
It prevents damage to the lamp glass cover and the
cavity.
2.
Turn electrical power off at the main source or unplug
the appliance.
3.
Turn the lamp glass cover counterclockwise to remove
it.
4.
Clean the glass cover.
5.
Replace the lamp with a suitable 300°C heat-resistant
lamp.
6.
Replace glass oven lamp glass cover.
7.
Turn power back on again at the main source (or plug
the appliance back in).
Special door care instructions - Most oven doors contain
glass that can break. Do not close the oven door until all
the oven racks are fully in place. Do not hit the glass with
pots, pans, or any other object. Scratching, hitting, jarring,
or stressing the glass may weaken its structure causing
an increased risk of breakage at a later time.
Be sure the oven is unplugged and all parts are cool
before replacing oven light.
IMPORTANT
CAUTION
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a
paper towel or cotton glove while handling the new bulb
when installing.
Figure 36: Oven light
NOTE
