background image

23

SOLUTIONS TO COMMON PROBLEMS

PROBLEM

POSSIBLE CAUSES

SOLUTIONS

PREVENTIVE MEASURES

Pilling

(Fibers ball up 

and cling to 

fabric.)

•  Pilling is normal with syn-

thetic and permanent press 

fabrics. This is due to abra-

sion from normal wear.

•  Use a lint brush or shaver to 

remove pills.

•  Use fabric softener in the 

washer to lubricate fi bers. 

•  When ironing, use spray 

starch or fabric fi nish on col-

lars and cuffs.

•  Turn items inside out to 

reduce abrasion.

Residue or 

powder on dark 

items;

Stiff, harsh 

fabrics.

• Undissolved detergent.

•  Some granular detergents 

can combine with hard 

water minerals to form a 

residue.

•  Overloading the washer.

•  Rewash load.

•  Increase water temperature 

using hottest water safe for 

fabric.

•  Do not overload washer.

•  Use liquid detergent or 

use nonprecipitating water 

conditioner with powder 

detergent.

Wrinkling

•  Overloading the washer.

•  Incorrect wash cycle for 

wash load.

•  Reduce load size.

•  Rinse in cold water with liq-

uid fabric softener using the 

casual or delicate cycle.

•  Do not overload washer.

•  Remove items from washer 

as soon as cycle is com-

pleted.

•  Use liquid fabric softener.

Yellow buildup 

of body soil on 

synthetic fabrics

•  Agitation time too short.

•  Wash water temperature 

too low.

•  Not enough detergent.

•  Soak in detergent booster 

or product containing en-

zymes.

•  Wash in hottest water safe 

for fabric using casual cycle.

• Increase detergent.

•  Add bleach safe for fabric or 

treat with color remover.

•  Select correct wash cycle.

•  Use correct amount of 

detergent.

•  Wash synthetics frequently 

using hot or warm water.

Yellow or brown 

rust stains

•  Iron or manganese in water 

supply, water pipes, or 

water heater.

•  To restore discolored load 

of whites, use rust remover 

safe for fabric.

•  Do not use chlorine bleach 

to remove rust stains. It 

may intensify discoloration.

•  Use nonprecipitating water 

softener.

•  Before washing, run hot 

water for a few minutes to 

clear lines.

•  Drain water heater occa-

sionally.

•  For an ongoing problem, 

install an iron fi lter in your 

water supply system.

Common Washing Problems, continued

Содержание 3921WWGD2KIT















































Отзывы: